Tuesday, December 27, 2016

The R300 Has The Option Of Customizable Stickers !

If you have been vaping for a while,you must know Jaybo & Wismec, lately, Wismec RX300W Coming into the market, this is the first 300 Watt box mod of wismec.

The Reuleaux RX300 now has the option of customizable stickers, so you can get a more personalized look. One of the biggest issues in the beginning with the RX200 was the limited color selection. Now you can have the same mod as everyone else and still stand out.

The Reuleaux RX300 is available in silver, silver carbon fiber, black and black carbon fiber. I have always been a huge fan of the way carbon fiber looks on most mods so I am all about it. The decorative stickers are currently available in black or brown.


Sunday, November 27, 2016

Last Day To Get iStick Pico With A Price $28.40

Today is the last day to enjoy the Black Friday Activity offered by Eleaf Official Authorized Online Store . If you want to buy Eleaf Pico TC 75W Box Mod , Buy it Now ! the original price is $42.90 and The special price is $32.80 . For Thanksgiving and the Black Friday, they offer a discount code for customers to enjoy a 5% Off till 11/28/2016 . that means you can only need $31.16 can get a Pico Box mod Today .If you miss this, you need to wait another year !

Wednesday, November 16, 2016

100% Worth To Buy Wismec RX200S With Only $59.90

Wisemc Reuleaux RX200S,Very popular box Mod now ,Only $59.90 you can get one at wismec.org , 100% Original, enjoy best after service, really worth to buy .

Sunday, November 6, 2016

The Most Striking Thing About Kanger Protank 4

The Protank 4 looks fantastic. Its aesthetics are classy and its versatility can't be denied. what's the most striking thinkg about Kanger Protank 4 ?

The most striking thing about the Kanger Protank 4 is its versatility. As you saw from the bullet points, it has its own RBA deck and is compatible with the broad array of SSOCC coils already available. The Protank 4 kit comes with a 1.5-ohm coil that appeals to mouth-to-lung vapers and Kanger's new ceramic coil.

If you can to buy this tank , click here !

Saturday, October 8, 2016

Benifits Of Kanger Protank 5 Tank

Vapers are given many ways to personalize their system, one of which is to choose the tank that suits their needs.Do you know the Newest Tank form Kanger E Cig Company, the Kanger Protank 5 ? this is a amazing tank ,here is the benifit of this tank :

Enjoy the benefits of a leak-free structure and air flow control. Fill this mod from the top by removing the black top cap holding your removable drip trip, colored black with a wide profile. That's going to let the clouds out for sure.

With a 3-ml tank and a hot system, you could be refilling often. The ability to refill e juice through the top of the mod is an advancement over the previous, bottom-filled Protank.
Kanger also supplies a second tube for the Pyrex Protank 5. These things break, even if you look after them carefully and in spite of their reinforced construction.

A vaper will easily over-tighten one of the caps after taking the RBA apart and putting it back together, which they are meant to do in order to clean it or replace the coil. Accidents happen, but Kanger is one step ahead of them. A single 0.5-ohm coil is supplied with the kit.

Know more kanger products , visit kanger official authorized online store,kanger.info

Wednesday, September 21, 2016

Whichever You Choose To Control,The Juppi Controls The Other

Kanger just releaed a new starter kit, the Kanger Juppi 75W TC Kit , Here is some detail about the Juppi Box mod.

The Juppi operates in variable watt and temperature control modes, though not at the same time, of course. Whichever you choose to control, the Juppi controls the other.

When you fit a tank and turn on TC mode, select a heating element made from Titanium, NiChrome, Ni200, or stainless steel. That way, you can turn up the thermostat to 600F and enjoy an efficient setting that produces superior flavor.

Choose your Kanthal build and install that. Now your range is 7 to 75 watts. Resistance starts at 0.1 ohms; no mention is made of a lower minimum in TC mode.

Know More about this kit, you can visit kanger official authorized online store, click http://www.kanger.info/kanger-juppi-75w-tc-starter-kit.html

Thursday, September 8, 2016

New Firmware For iStick TC 100W Luanching !

Good news for all the iStick TC 100W Owners , Eleaf just released a new firmware V1.12 for this box mod,it can up to 120W maximum output power and with some new functions.

Want to download , click http://www.eleafworld.com/download/

Thursday, August 25, 2016

The Smallest 160W TC Box Mod In The Market

The KangerTech KBOX 160W TC Box Mod is the smallest 160W temp control box mod in the market,features Ni/Ti/SS/NiCr four TC mode supported, 160w power output, TC temp control, and powered by 2 x 18650 batteries.
Now you can buy this mod from kanger official authorized online store, kanger.info ,use the discount code kanger to enjoy 5% off, The expiration date is 8/31/2016 .

Sunday, August 7, 2016

An updated and portable Kanger Evod Pro 2 Starter Kit to own!

A new starter kit from Kanger comes! Kanger Evod Pro 2, based on the previous Evod Pro series, is the mini upgraded version of Evod pro Starter Kit, the newest tank and battey all in one design vape kit. Still you can enjoy 4ml big eliquid capacity and long sustainable battery life supported by built-in 2500mAh battery. Now this all-in-one kit is available on Kanger official authorized online store kanger.info.

Friday, July 29, 2016

Incredibly powerful 160W Starter Kit from Kanger!

Unlike other ecigarette kits, this starter kit by Kanger has a huge power output as powerful as 160W, with temperature control system in Ni200 / Ti / SS / Ni-Chrome mode. So you can make settings in the temperature rang 100 - 315C / 200 - 600F. 7ml e-liquid capacity is really a big advantage over other tanks. Also you can enjoy RBA vaping through RBA base and MTL, DL style drip tip for your option. Here on the Kanger official authorized online store you can get 100% authentic Dripbox 160W Starter Kit!

Monday, July 18, 2016

Newest Frimware Version For iStick Pico

Eleaf company just released a newest firmware for iStick Pico , You can upgrade your iStick Pico  from V1.00 to V1.01 Now !

This new firmware features a simpler interface for VW mode, a Smart mode for easy operation and a custom logo for fun.
you can click here to know more :

Monday, July 11, 2016

The RX75 Unlike Any Ever Attempted Before !

The Wismec RX75 screams innovation, it's durable protective shield and bestly firing switch are unlike any ever attempted before!

The RX75 takes a step back from high power and gears towards innovation, reliability, and functionality. It features a maximum of 75 watts, has temperature control, a bold new design with a squeeze switch, and is powered by a single 18650 battery. Aside from its power capabilities, the RX75's innovation lies in the design. The control center of the RX75 is hidden behind a protection shield to avoid any accidental setting changes the screen. Its switch has also been innovated, by combining the battery access door and firing switch into one mechanism, users can squeeze the battery door to fire the device.

Wednesday, July 6, 2016

About Eleaf iPower 80W TC Box Mod Battery

Do you know there is another new product luanched by Eleaf company ? yes , it's the Eleaf iPower . With High Outpower Of 80W , Just like the other box mod of iStick Series, it looks very fashionable , Sure can make you like it.here is the look of this box Mod, whould you like to have a try ?

Tuesday, June 21, 2016

What Would Happen When Take Other Brand Atomizer Match With RX200 ?

I asked Wismec if using the Wismec RX200 with atomizers in the Joyetech family, what may happen ?Here is the answer, I want to share with you guys , actually , I think this would be good for vapers .
"It is better to use Wismec atomizers, as some atomizer threads on the market are too long to thread on. If you thread these atomizers on the device for a long use, it will damage the 510 thread of our device. Our warranty will be invalid for this situation, as the problem is caused by the third-party products. If the 510 pin is stuck down, you could try to make it up with a screwdriver or a nipper."

Want to know more about Wismec RX200, Click on http://www.wismec.org/reuleaux-rx200.html

Sunday, June 12, 2016

What To Do ? - When Your Atomizer Doesn't Work With Your Mod/Device

One of the most common issues found with vaping is that atomizers and clearomizers tend to seem as if they've completely stopped working with a mod/device.There are many vapers out there that believe that there's a problem with their attachment, while others will completely write off their device out of frustration.If you're too that point,stop what you're doing and let us sharing some of our troubleshooting tips for when your atomizer doesn't work with your mod/device.

Tip 1: Use Proper Maintenance
You can run through all the troubleshooting you want, but if you do not properly maintain your atomizer, clearomizer or device, then all the problem solving you do may not ever matter.  The first thing you should attend to is proper maintenance.  To use proper maintenance, thoroughly wipe down your gear with a damp cloth.  Ensure that you properly clean areas that have small crevices.  These small hard-to-get-to areas absorb junk and debris, especially since e-liquid tends to attract to the rest of our gear.

Tip 2: 90% of The Time It's A Connection Issue
90% of the time it's a connection issue… we say this because it's true.  Before following along with the rest of the tips we provide today, you must first know that if you're experiencing issues with your atomizer not working properly with your mod/device, then it's most likely a connection issue between the two.

To solve this, you'll want to begin touching base with each part of your atomizer or clearomizer, and your device.  Anywhere that a connection is being made, you'll want to thoroughly inspect and ensure that those areas aren't covered in debris, and that they are actually making a proper connection.  Most times, a coil in an atomizer isn't screwed in all the way, a center pin on a device is lower than it should be or the pin on an atomizer or clearomizer needs to be pulled down just a hair.  There are many reasons why your atomizer may not work with your mod/device, and typically it comes down to a connection issue that you'll have to fix.

Tip 3: Adjust The Center Pin

Though above we've stated that adjusting your center pin can solve a connection issue, we would like to say it again because we can't stress enough how common it is to have a center pin issue.  The center pin is the small connection tip that sits inside of a 510 connector.  When your atomizer is screw into your device's connector, the atomizers pin and your device's center pin will meet and make contact for power.  Most times when an atomizer doesn't work with a device, it stems from the center pin being too low or an atomizers pin being too high.  Manufacturers have began solving this issue recently, by making that center pin adjustable or spring-loaded to reduce this issue in the future.  If your device doesn't come with an adjustable or spring-loaded center pin, you can pull you pin up a bit by prying the pin just a bit with something small, such as a precision flathead screwdriver.  However, we recommend that doing this, you take a risk of damaging the o-ring seal that rests between your connector and center, so be sure you're careful and precise.

Tip 4:  Check For Shorts
If you're using an rebuildable atomizer, then your issue will more than likely come from your current coil build.  Inspect your build and check for shorts.  Ensure that your posts are screwed down to a snug fit and your end-leads are cut short so that they do not touch the deck or the atomizers housing.

Tip 5:  It's The Coils Fault
A lot of times, when using a clearomizer, it's honestly the coils fault.  Though manufacturers to a stand up job on manufacturing pre-made coils, we know that everyone is not perfect, and even an inspection crew at the facility will catch every bad coil.  With this being said, it's very possible that sometimes you'll come across a coil that is dead on arrival, but more likely just a simply connection issue.  Though we would like to automatically blame it on the coil… it's the coils fault, there may just be more to it than a DOA product.  If all else fails, and being that manufacturers do sometimes make mistakes, we highly recommend when buying any atomizer or clearomizer that you purchase extra coils for these exact moments.

Wednesday, June 8, 2016

Online Prices Of iStick Pico iS Really Cheap !

The Eleaf Pico 75W TC Mod With Melo 3 Atomizer on the Eleaf Officail Authorized Online Store is $48.99, with some vendors asking as much as $70 during the initial roll-out. the mod itself only sold $32.80 .Online prices for Eleaf iStick products are typically discounted.

100% Original ,best after sale service ,just buy it form istick.org

Monday, May 30, 2016

Have you exprienced Wismec Reuleaux RX200 ?

Wismec Reuleaux RX200 TC Mod is a new version of Reuleaux MOD with Joyetech chip board. Unique 3 x 18650 cells design and advanced TC technology makes it stand out from mainstream products.

Thread type: 510 thread Spring Connector
Cell type: Three 18650 cells
Output mode: TC/VW mode
Output wattage: 1-200w
Temperature range: 100-300°C/200-600°F(TC mode)
0.91 inch OLED screen
Optimized Heat Dissipation Design
Unique Structure & Innovative Appearance
Magnetic Back Cover
Unique Exterior Design: Its irregular and unique appearance benefits from the structure of 3 replaceable battery cells, which makes it feel great in your hand. (Recommend: high-rate 18650 cells, such as Sony US18650VTC4)

Reverse Polarity System for Batteries: If installed improperly, the plastic hoop will prevent the battery touching the opposite contact head.

Temperature Protection : Reuleaux requires a heating coil made from Nickel 200 or other materials with a well-defined temperature coefficient of resistance, rather than Nickel Chromium or Kanthal alloys when using in TC mode. Appropriate temperature settings will reduce the breakdown of flavoring and base liquid components.

200 Watt Variable Power: The maximum output power can reach 200w, which will bring you a wonderful vaping experience.

Stainless Steel Thread and Spring Connector: The stainless thread makes the device much wear-resisting and the spring connector greatly increases its adaptability.

Know more ,click on http://www.wismec.org/reuleaux-rx200.html

Tuesday, May 24, 2016

Wismec Products Is Really Awesome !

If you are walking into the vaping wolrd and want to find some device , Wismec Products can be a good choice for you ,it is really awesome ! wismec.org is the official authorized online store to buy kind of Wismec Products .

In this store , you can buy reuleaus Series including RX200,DNA200,RX200S ,Presa Series Including TC40W,TC75W,TC100W, and Wismec Skyladon,Indestructible RDA,Bambino RDA ,so on .

Monday, April 11, 2016

Heavy use of electronic cigarette also need not worry about carcinogenic formaldehyde

Electronic cigarette safety research continues to release, this time is about the comparison of formaldehyde intake when using electronic cigarettes and cigarettes.
Research as a result, even if the heavy use of electronic cigarettes, reached the amount of 350 a day, also no worry about the risk of carcinogenic formaldehyde. The research results show that the heavy use of electronic smoke every day 350, the amount of formaldehyde, only breathe all day international health organization recognized indoor clean air standards one 6 of the amount of formaldehyde. While the use of tobacco products are exposed to formaldehyde content is far more than this standard.
The study was supported with British American tobacco company.
Statistics show that cigarette can kill directly or indirectly half of its users.
So eVic-VT Kit we can rest assured, the use of unique shape and temperature control, use after feeling is very good!

Tuesday, March 15, 2016

British American tobacco rapid development of electronic cigarettes

Market observation, British American tobacco group, announced on September 22, will acquire a polish electronic cigarette manufacturers. British American tobacco is currently actively looking for the tobacco substitutes, the acquisition will give its product line expansion.
According to media reports, British American tobacco Group, the acquisition is more complex, first have to buy CHIC Group (CHIC Group), because the CHIC Group owns a 60% stake in the polish electronic cigarette manufacturers. After buying CHIC group, the British American tobacco group will have the company more than 800 retail outlets in Poland, electronic smoke oil production factory, r&d center and VOLISH, P1, Provog electronic cigarette brand. Specific purchase amount is unknown.
At the same time, British American tobacco also announced that already with another cigarette makers Renault made technology sharing agreement in the United States. With the influence of the current global tobacco consumption continues to decline, the agreement on British American tobacco smoke grass alternative markets has provided further support. According to Wells Fargo bank, according to data from the burning of tobacco market capacity has fallen by 3.2% in fiscal year 2014, and expects to have some spray products market share at the end of 2015 could exceed $7 billion. And by sales, British American tobacco tobacco industry's international, Joyetech eVic-VT after the United States.
British American tobacco said, with Renault agreements will allow both sides before the end of 2022 in the United States has maintained exchange of atomization technology, at the same time, the two sides will also spray product research and development, regulatory, scientific, cooperate production problems. The two companies are expected to sign a clear agreement by the end of 2015. British American tobacco currently owns a 42% stake in Renault's American.
Vype electronic cigarette brand belonging to British American tobacco, it has multiple versions of the Vype; Renault America also have their own Vuse electronic cigarette brand.

Friday, February 26, 2016

How to use Joyetech eVic-VT:

How to use evic vt joyetech:

1. ON / OFF: power it on or off by five quick succession clicks on the ignition key.
2. Smoke: Hold down the fire button to inhale through cigarette holder and exhale by releasing the ignition key.
3. The screen hidden feature: when the device is on, simultaneously press the ignition key and turn the control knob to the left to stealth on or stealth off. In stealth mode, you can perform using when the screen shuts down and quickly view the current status of hidden features by pressing the ignition key.
4. The key lock function: when the device is on, simultaneously press the ignition key and turn the control knob to the right to open the function of key Lock or Key Unlock. In the key lock mode, the fucntion of turning the adjuster will be temporarily unavailable, to prevent accidentally altering temperature / power (VT / VW) setting.
Copyright © 2013- http://www.newsliveroom.com/ All Rights Reserved. News liver Room